- 相關推薦
廢舊電路板低溫改性研究
摘要： 介紹了電路板的組成和類型,重點研究了廢舊電路板在低溫狀態下沖擊強度、彎曲強度和剪切強度的改性變化.實驗結果表明,沖擊強度和剪切強度在-30℃時變化明顯.在此基礎上進行了粗碎實驗和細碎實驗,先使用ZKB-2型雙輥式剪切破碎機將電路板破碎到20 mm×20 mm的塊狀,測試在低溫狀態下的功耗并計算其生產能力,在-30℃～-10℃范圍內,生產能力可提高約17%,再降低溫度會使產品質量受到影響.然后使用R型沖擊破碎機對廢舊電路板進行細碎實驗,將物料破碎到3 mm以下,并記錄在不同工況下的參數.實驗結果表明在-30℃左右平均功率下降得較快,冷卻5min對低溫改性最有利. Abstract： Introduce cryogenic grinding and the components of Printed Circuit Board (PCB). Study the low-temperature modification of PCB, including mechanical property to find the influence of the different low-temperature on impact strength, flexural strength, shear strength of PCB. Tests show that impact strength and shear strength of PCB change sharply at -30℃. Used ZKB-2 type double roll shear crusher to crush PCB to 20mm×20mm particle size, in a temperature range of -30℃～ -10℃, the product yield is 17% higher than room temperature, and much lower temperature may deteriorate the product quality of crusher. Used R type mill to grind sample to minus 3mm under different working condition, the average power is decrease in evidence at -30℃, freezing time for 5 minutes is best. 作 者： 周翠紅 路邁西 潘永泰 陳茂和 喬雪峰 ZHOU Cui-hong LU Mai-xi PAN Yong-tai CHEN Mao-he QIAO Xue-feng 作者單位： 周翠紅,喬雪峰,ZHOU Cui-hong,QIAO Xue-feng(北京石油化工學院環境工程系,北京,102617)路邁西,潘永泰,陳茂和,LU Mai-xi,PAN Yong-tai,CHEN Mao-he(中國礦業大學北京校區化學與環境工程學院,北京,100083)
【廢舊電路板低溫改性研究】相關文章：
[品牌]改性塑料項目可行性研究報告04-28
讓廢舊電池回家02-26
廢舊電池的危害作文09-21
讓廢舊電池回家作文09-13
廢舊電池不能亂扔作文12-10
焊接電路板心得體會03-14
環保教案《廢舊電池回收》04-25
回收廢舊電池倡議書11-10
【精選】廢舊電池的危害作文9篇02-24
奇妙的動物車中班廢舊材料教案08-25